Unleash the full power potential of your ATV Waterproof plug-and-play device To unleash top performance, experienced riders can bypass restrictions placed on power output at low speeds Increases power at low speeds and improves throttle response without adversely affecting the speedometer reading or the electronic transmission controller Uses OEM-style connectors — no cutting, splicing or soldering required for installation, so you can install and remove the Power Module without making any permanent changes to the stock configuration Included Items: (1) Power Module (1) Velcro strip (1) Alcohol swab (2) Tie strap (1) Install guide
Installation:
1: Disconnect the battery
2: Remove the CDI from the Quad. This makes it easier to remove the 2 connectors from the CDI.
3: Look toward the rear of the quad, facing the CDI. This will orientate you to which plugs you need to unplug. Unplug the center and the right hand plug from the CDI, leaving the left plug still plugged to the CDI.
4: Plug in the male Moose correct sized plugs into the CDI.
5: Plug in the remaining Moose plugs to the stock Kawi plugs that you unplugged from the CDI.
6: Insert the Moose module between the modules already installed, so they do not rub.
7: Reconnect the battery, replace the seat, and you are ready to enjoy the added power of the Moose Module. You should notice an immediate increase in throttle response and low speed power.
- Waterproof plug-and-play device unleashes the full power potential of your ATV
- Bypasses restrictions placed on power output at low speeds to unleash top performance for experienced riders
- Increases low-speed power and improves throttle response without adversely affecting the speedometer reading or the electronic transmission controller
- Uses OEM-style connectors – no cutting, splicing or soldering required for installation
- Removing the ATV Power Module returns the vehicle to stock configuration; no permanent changes are made
Shop for MOOSE® ATV Power Modules with our sponsor partspitstop.com